Genius X2 4G/VoIP Genius X2| User Manual | Page
8
/
24
Assemble the Genius X2 hardware
Line the Antenna up with the socket and use the metal grooves to tighten by hand,
taking care not to cross-thread. The connection should be thumb-tight only.
Plug the curly cord into the socket on the front-left side of the main unit, and the
other end into the handpiece.
If the phone is to be wall mounted, the distance between the two mounting holes is
102mm, using M4 screws. Rotate the handpiece clip as shown.
Desk Mount
Wall Mount
Inserting the SIM card
Unplug the cable from the USB port if
it has already been inserted.
Unscrew, lift and remove the cover.
Remove the battery, taking care not
to put pressure on the wires.
Insert the SIM card as shown. Slide
the card as far as it will go.