Ariens 920025, Руководство по обслуживанию, Страница: 52 / 60

EN – 48
TRACK REPLACEMENT
Models 920028, 920318
Remove Track
IMPORTANT: Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Place unit in service position. See Service Position on
page 7.
4. Remove drive wheel. See Remove Track Drive Wheel
on page 46.
5. Remove track from carriage assembly. See
Figure 117.
Install Track
See Figure 118.
IMPORTANT: Tracks are directional and must be installed
with tread in the orientation shown in Figure 118.
1.
Install track onto carriage assembly so bogie wheels
and track runner are seated in track center.
2. Reinstall drive wheel. See Install Track Drive Wheel
on page 47.
3. Return unit to operating position.
4. Reconnect spark plug wire and fill fuel tank.
5. Adjust track tension. Refer to Operator’s Manual for
adjustment procedure.
IMPORTANT: Check all adjustments after first use.
WARNING: AVOID INJURY. Before placing unit
in service position, drain fuel from tank and fuel
system. See
Draining Fuel System on page 7.
Make sure unit is secure and will not tip.
Figure 117
Figure 118