BEFORE YOU BEGIN
BEFORE YOU BEGIN
3
Back Panel Interface
Figure 2.
Back Panel Interface
POWER
The power interface connects to the power adapter.
On/Off
Select the On/Off switch to turn the NetDSL on or off.
ETHERNET
The Ethernet interface connects the NetDSL to a 10BaseT network.
DSL
The ADSL interface connects the NetDSL to an ADSL line.
Minimum System Requirements
• ADSL line
• 10BaseT Ethernet interface or Wireless LAN interface
• CD-ROM drive
NetDSL gives you the option of configuring the router using the
Arescom NetDSL Manager. The system requirements are listed
below:
Using the NetDSL Manager:
• Ethernet card or WLAN PC card
• PC* with at least a 486 microprocessor (Pentium
®
recommended)
• At least 4 MB of space available on the hard disk drive
• Microsoft
®
Windows
®
95OSR2/98/2000/Me
/
NT Operating
Systems
* You may configure the NetDSL from any PC attached to the
Local Area Network (LAN) with the requirements listed above.
