BEFORE YOU BEGIN
2
NetDSL 1700 Version 5.2 Get Started User’s Guide
Diagram of the NetDSL
Front Panel Interface
Figure 1.
Front Panel Interface
PWR (Power)
A PWR LED is ON when power is supplied to the NetDSL unit.
DIAG (Diagnostic)
The DIAG LED indicates the NetDSL router has been successfully
booted up and the software is functional. When NetDSL is powered
on, the orange DIAG LED flashes while the router is booting up. After
10 to 15 seconds, the DIAG LED stops flashing and remains off.
DSL
The DSL LED displays the DSL connection between the NetDSL and
the remote DSL network. The green DSL LED flashes slowly when
the DSL line is trying to connect. The LED remains solid if the DSL
line is trained and ready between the PC and the router. A solid green
LED indicates data activity between your PC and the router.
ETHERNET
The ETHERNET LED displays the Ethernet connection between the
NetDSL and the Ethernet network. The green ETHERNET LED
flashes slowly when the Ethernet line is being trained. The LED
remains solid if the Ethernet line between the PC and the router
successfully connects. A flashing LED indicates data activity between
your PC and the router. If the data traffic is heavy, the frequency of
the flashing green LED becomes higher and will appear solid.
WLAN
The WLAN LED displays the connection between the NetDSL and
the wireless LAN network. The green WLAN LED flashes slowly
when the wireless LAN is trying to connect. The LED remains solid if
the wireless LAN between the PC and the router successfully
connects. A flashing LED indicates data activity between your PC and
the router. If the data traffic is heavy, the frequency of the flashing
green LED becomes higher and will appear solid.
