SOFTWARE INSTALLATION & CONFIGURATION
SOFTWARE INSTALLATION & CONFIGURATION
13
Step 4.
Check to see if
Internet Protocol
(TCP/IP)
is listed
under Network
Components.
A.
If you do not see
TCP/IP
listed
under Network
Components, you
have not installed
TCP/IP. Repeat
steps 1 - 4.
B.
If you see TCP/IP listed under Network Components, you
already have TCP/IP on your Windows 2000. Proceed to the
section titled “
Configuring TCP/IP in Windows® 2000
”.
Configuring TCP/IP in Windows
®
2000
Step 1.
From the
General
tab in the Local Area Connection Properties
window, select
Internet Protocol (TCP/IP)
listed under Network
Components and click
Properties
.
To enable dynamic IP addressing:
Step 1.
Click the radio button next
to
Obtain an IP Address
automatically
.
OPTIONAL:
You can either click
Obtain DNS server address
automatically
or
Use the
following DNS server addresses
options. If you choose the
Use the
following DNS server addresses
option, then you need to enter the
Preferred
and
Alternate
DNS
server IP addresses
.
Step 2.
Click
OK
to exit the
Internet Protocol (TCP/IP) Properties window. Proceed to the
next section titled “
CONFIGURING YOUR ROUTER
.”
