CONFIGURING YOUR ROUTER
CONFIGURING YOUR ROUTER
21
the
Specified NAT IP Address
checkbox and
enter the IP address based on your ISP’s setup.
Also, you
MUST
select the
PPP Configuration
feature from the list located in the left panel, and
enter the
User Name
and
Password
.
Option 2. If you select
SNAP/IP
as your encapsulation type,
then you can check the
Enable Network Address
Translation (NAT)
checkbox if you are using a
single user account. You can then select the
Specified NAT IP Address
checkbox and enter
the IP address based on your ISP setup.
Option 3. If you select
SNAP/Bridge
as your encapsulation
type, then you can check the
Enable Network
Address Translation (NAT)
checkbox if you are
using a single user account. You can then select
the
Specified NAT IP Address
checkbox and
enter the IP address based on your ISP setup.
Wireless Configuration
Step 1.
From the Configuration
menu, double-click the
Wireless Configuration
icon.
A.
Select a desired
wireless channel
number (Default
value is set at 6).
B.
Check the
Enable
WEP (Wireless Encryption Protocol)
option to ensure data
transfer security.
C.
Enter a set of desired
WEP KEY
numbers.
NOTE:
This WEP KEY must be the same for all other wireless LAN
devices on the same LAN to access the router.
D.
Click
Apply
,
and review the summary of you basic
configuration.
E.
Click
Finish
to save the parameters to NetDSL.
Congratulations! You are ready to begin using your NetDSL router for
shared Internet access. Enjoy!
