17
24. Open the battery hatch, unplug the Li-Po battery and switch OFF the
transmitter. Assemble the propeller and spinner in the following sequence:
a. Pass the circular propeller driver over the propeller shaft, noting its
orientation.
b. Add the spinner backplate.
c. Fit the propeller over the shaft and seat it comfortably against the
upstands of the backplate.
d. Add the washer then loosely fit the prop nut.
e. Add the prop shaft to the motor shaft, push it back as far as it will go,
then securely tighten the prop nut, noting that a loose propeller can cause
considerable damage and serious injury.
Содержание Crusader II PTF
Страница 24: ...www Ares RC com REV 001...
