Ares Crusader II PTF, Руководство пользователя и техническая информация

Страница: 14 / 24

14
14. Centre all the trim levers noting that trim center is indicated by an audibly
longer beep tone.
15. Connect the battery to the Electronic Speed Controller (ESC). A series of
three regular beeps, followed by two audibly dissimilar beeps will be heard
indicating that the ESC is armed and operational.
16. Stow the leads carefully, then close and lock the hatch. In the unlikely event
that the servos do not operate see the PAIRING instructions at the back of
this instruction manual.
17. With the control surfaces centered, connect the elevator and rudder
clevises to the outer hole of each control horn noting that you may have to
screw the clevis in or out to ensure that the control surface remains in the
neutral position.
MODE 2 MODE 1