Ares Crusader II PTF, Руководство пользователя и техническая информация

Страница: 6 / 24

6
• To charge the LiPo battery you MUST use only the included charger
(where applicable) or a dedicated LiPo battery charger suitable for safely
charging the battery provided. Failure to do so may result in a fire causing
property damage and / or personal injury. DO NOT use a NiCd or NiMH
charger.
• Always charge the LiPo in a proprietary, fireproof, dedicated LiPo charge
bag.
If at any time during the charge or discharge process the battery begins to
balloon or swell, discontinue charging or discharging immediately. Quickly
and safely disconnect the battery, then place it in a safe, open area away
from flammable materials to observe for at least 15 minutes. Continuing to
charge or discharge a battery that has begun to balloon or swell can result in
a fire. A battery that has ballooned or swollen, even a small amount, must be
removed from service completely.
For best results, store the battery at room temperature – approximately
68 – 77°Fahrenheit (F) – and in a dry area.
Contents (RTF)
• 1 x Crusader RTF airframe, comprising: fuselage assembly; wing panels
(L & R); stabilizer; fin; undercarriage set.
• 1 x 6-channel Hitec Red enabled KA-6 transmitter.
• 1 x 750kV brushless motor - pre-installed.
• 1 x 40A brushless ESC - pre-installed.
• 4 x 9g servos - pre-installed.
• 1 x Hitec Red enabled KA-6 receiver - pre-installed.
• 1 x 3S 11.1V 2200mAh LiPo battery.
• 1 x 12V DC 3S LiPo balance charger.
• 1 x Mains power adapter.
• 1 x 12 x 8” propeller,
prop adapter and spinner.
• 1 x Tube of Ares
Polystyrene Glue.
• 1 x Quick-start guide.