Ares Crusader II PTF, Руководство пользователя и техническая информация

Страница: 15 / 24

15
18. Check that the ailerons are centered and, if not, adjust the clevises to
suit.
19. Make sure the control surfaces operate in the correct direction. With
the model in front of you, facing away, move the rudder stick to the left
and check that the rudder moves left in response. Right rudder stick will
move the rudder to the right.
20. Check the alignment of the nose wheel. With the rudder in the neutral
position this will need to be straight. If it’s slightly off center, adjust it in
the following manner:
• Lift the wing, disconnect the aileron leads, and stow it carefully to one
side.
• Locate the nose wheel steering pushrod on top of the rudder servo.
• Undo the pushrod’s screw-lock connector with a crosshead screwdriver.
• Adjust the pushrod to bring the wheel into alignment.
• Tighten the screw-lock connector, reconnect the aileron leads and
reattach the wing.
UP
MODE 2
MODE 1