Ardo PE58SE2F, Инструкция пользователя

Страница: 19 / 64

will emit a sound signal or BEEP ; the relevant cooking zone
will continue to operate and the cooking level set previously,
e.g. 4.
Note: the area (S) serves a double purpose:
1- Timer
2- Clock
Timer (N)
This function can be used to set an amount of time (between
1 minute and 4 hours) after which the selected
cooking zone
will switch off automatically.
Note: The Timer may be activated for all 4 cooking zones
simultaneously.
Operation:
- Select the cooking zone ( E ) (including the double zone F ,
if desired).
- Set the desired cooking level (between 1 and 9) using the
SLIDER control (
D1 ).
- Press the Timer button ( N ); 0:00 will appear on the display
( Q ). At this point the Hotplates with timer function enabled
indicator light ( P ) will begin to flash.
- Adjust the time as desired using the ”+” and ”-” buttons
( O ).
- Once the set time has elapsed, the indicator light ( P ) will
begin to flash and a sound alert will be emitted.
To deactivate the sound alert, simply press the relevant
cooking zone selector button ( E ), otherwise it will be
deactivated automatically after 20 seconds.
Note: 3/4 seconds after the cooking time has been set,
the display ( Q ) will enter standby mode and the clock will
reappear.
To display the cooking time remaining, simply press the
relevant
cooking zone selector button ( E ).
Clock
The first time the hob is switched on, or after the power supply
has been cut off, you will need to set the time.
Adjustment
While the hob is switched off, press the Timer button ( N ) until
the numbers on the display ( Q ) begin to flash; use the “+” and
“-” buttons ( O ) to set the correct time.
Once you have finished, press the Timer button ( N ) again until
the numbers on the display ( Q ) stop flashing.
Minute Minder (Countdown)
This function can be used to start a countdown timer.
When the set time has elapsed, the hob will emit a sound alert
without altering any other active functions.
Operation:
- select a cooking zone (E) and make sure the cooking level
remains set to “0”.
Press the Timer button (N); 0:00 will appear on the display
(Q). At this point the Hotplates with timer function enabled
indicator light (P) will begin to flash.
- Adjust the time as desired using the ”+” and ”-” buttons (O).
- Once the set time has elapsed, the indicator light (P) will
begin to flash and a sound alert will be emitted.
To deactivate the sound alert, simply press the relevant
cooking zone selector button (E), otherwise it will be
deactivated automatically after 20 seconds.
Note: 3/4 seconds after the time has been set, the display (Q)
will enter standby mode and the clock will reappear.
To display the time remaining, simply press the relevant
cooking zone selector button (E).
- If the cooking zone for which the Minute Minder has been
set is adjusted to a level higher than “0”, the remaining time
period will be transferred to the cooking timer.
- If all four cooking zones are switched on, it will not be
possible to activate the Minute Minder function
- The timer and Minute Minder functions may, however, be
activated simultaneously (using different cooking zones).
THE MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE
ABOVE WARNINGS.
- 19 -