![ARDESTO DMC-SA1212SB Скачать руководство пользователя страница 47](http://html.mh-extra.com/html/ardesto/dmc-sa1212sb/dmc-sa1212sb_instruction-manual_2966058047.webp)
EN
47
BEFORE CONTACTING THE SERVICE CENTER
Fault
Possible causes
Remedy
A system error
message appears
on the display:
E*-- (first bowl), --E*
(second bowl)
System error, possible device overheating
Do not turn on the device with an
empty bowl! Unplug the appliance,
open the lid and let it cool down
for 10-15 minutes, then continue
cooking�
A system error
message appears
on the display: E6
The bowl is not installed in the housing of
the device
Do not turn on the appliance
without the bowl inside� Unplug the
appliance from the mains, open the
lid and let it cool down for 10-15
minutes, then continue cooking
The device does not
turn on
The device is not connected to the mains� The
electrical outlet is defective
Make sure that the unit is plugged
into a working electrical outlet�
or there is no current in the power grid�
The dish takes too
long to cook�
A foreign object or particles (debris, grits,
food scraps) has gotten between the bowl
and the heating element�
Disconnect the unit from the power
supply and allow it to cool down�
Remove any foreign object or
particles�
The bowl in the body of the device is installed
unevenly� The heating disk is very dirty�
Install the bowl evenly, with no
tilting� Disconnect the appliance
from
The heating disk is very dirty�
the power supply and let it cool
down� Clean the heating disk�
During cooking,
steam comes out
from under the lid
of the device�
The junction
between the bowl
and the lid of the
appliance is leaking�
The bowl is unevenly
positioned in the
body of the device�
Install the bowl evenly, with no
tilting�
The lid is not closed
tightly or a foreign
object has fallen
under the lid�
Check for foreign objects (debris,
grains, pieces of food) between the
lid and the body of the appliance,
remove them� Close the lid as far as
it will go�
The sealing rubber
on the cover is badly
soiled, deformed or
damaged�
Check the condition of the sealing
rubber on the inner lid of the
instrument� It may need to be
replaced�
If the problem persists, contact an authorized service center.