EN
45
Cleaning the removable inner lid
The removable inner lid and the sealing rubber are
recommended to be cleaned after each use of the
appliance� Rinse the cover thoroughly under running
water; mild detergent may be used� The cleaning
procedure is shown in diagram A3�
WARNING Be careful when cleaning the sealing rubber: its
deformation will cause the device to malfunction.
Cleaning the removable steam valve (diagram A3).
Clean the removable steam valve after each use�
1� Remove the inner lid�
2� Turn the steam valve counterclockwise and carefully
remove it�
3� Disassemble the steam valve�
4� Rinse all parts of the steam valve under running water�
Dry thoroughly before reassembling�
WARNING Do not rinse the valve under a strong water
pressure. Watch out for small removable parts when
cleaning the steam valve.
5� When reassembling, align the «Closed Lock» symbol
on the top of the valve with the «Open Lock» symbol
on the end of the lower part and turn the upper part
clockwise�
6� Install the steam valve in the device�
Cleaning the Bowl
The bowl of the appliance should be cleaned after
each use� You can clean the bowl by hand, using a soft
sponge and dishwashing detergent, or in the dishwasher
(according to the recommendations of its manufacturer)�
If heavily soiled, pour warm water into the bowl and
leave it to soak for a while, then clean it�
Be sure to wipe the outer surface of the bowl dry before
installing it in the body of the appliance�