Arctic Cat HDX 500 2017, Руководство по обслуживанию

Страница: 7 / 190

6
8. Fill the cooling system to the bottom of the stand
pipe in the radiator neck with properly mixed cool-
ant.
9. Disconnect the battery cables (negative cable first);
then remove the battery, clean the battery posts and
cables, and store in a clean, dry area.

NOTE: For storage, use a battery maintainer or
make sure the battery is fully charged (see Battery
section in this manual).
10. Store the vehicle indoors in a level position.
Preparation After Storage
Taking this vehicle out of storage and correctly preparing
it will assure many miles and hours of trouble-free riding.
Arctic Cat recommends the following procedure.
1. Clean the vehicle thoroughly.
2. Clean the engine. Remove the cloth from the exhaust
system.
3. Check all control wires and cables for signs of wear
or fraying. Replace if necessary.
4. Change the engine/transmission oil and filter.
5. Check the coolant level and add properly mixed
coolant as necessary.
6. Charge the battery; then install. Connect the battery
cables making sure to connect the positive cable
first.
7. Check the entire brake systems (fluid level, pads,
etc.), all controls, headlights, taillight, brakelight,
and headlight aim; adjust or replace if necessary.
8. Check the tire pressure. Inflate to recommended
pressure as necessary.
9. Tighten all nuts, bolts, cap screws, and screws mak-
ing sure all calibrated nuts, cap screws, and bolts are
tightened to specifications.
10. Make sure the steering moves freely and does not
bind.
11. Check the spark plug. Clean or replace as necessary.
12. Check the air filter and the air filter housing. Clean
or replace as necessary.
CAUTION
Avoid storing outside in direct sunlight and avoid using
a plastic cover as moisture will collect on the vehicle
causing rusting.
CAUTION
Before installing the battery, make sure the ignition
switch is in the OFF position.