Arctic Cat 700 Diesel 2015, Руководство по обслуживанию

Страница: 68 / 155

66
DE275B
B. Rotate the camshaft to align the reference marks
(A and B); then rotate the crankshaft to align ref-
erence marks (C and D).
DE272A
2. Install the timing belt keeping tension on the belt
between the drive pulley and the camshaft pulley.
Make sure the arrows are orientated in the direction
of engine rotation.
DE270A
DE225
3. Install the Timing Belt Tensioning Tool on the timing
belt tensioner tab; then using a suitable torque
wrench, position the handle 90° to the tensioner tab
and apply 14.5 ft-lb of torque. Tighten the timing
belt idler nut securely.
DE234A
DE222A
4. Rotate the engine in the direction of rotation (clock-
wise facing the timing belt) three full revolutions;
then loosen the idler nut and repeat step 3.
5. After repeating step 4 two times, tighten the timing
belt idler nut to 29 ft-lb.
6. Install the timing belt cover and secure with the
existing hardware; then install the crankshaft pulley
making sure the alignment pin is correctly located.
DE214B
7. Install the four cap screws and finger tighten; then
install a suitable holding fixture.