Arctic Cat 550 H1 EFI, Руководство пользователя

Страница: 44 / 71

42
4. Set/Reset Button - In conjunction
with the Mode Button, sets and
resets various displays on the digi-
tal gauge. Also used to shift from
speedometer function to tachometer
function on the speedometer/
tachometer gauge.
5. Fuel Level Indicator - Indicates
approximate amount of gasoline in
the gas tank.
„ NOTE: When the bottom seg-
ment flashes, approximately 3.5 L
(0.92 U.S. gal.) of gasoline remains
in the tank.
6. Low Oil Pressure - Will be dis-
played during self-test at start-up. It
will not be displayed during normal
operation as oil pressure is not
monitored on these models.
7. Odometer/Trip Meter - Odometer
registers the total distance the vehi-
cle has traveled. The trip meter can
be reset and can be used to measure
trip or trip legs. The odometer can-
not be reset.
„ NOTE: To shift between the
odometer (ODO) or trip meter
(TRIP), press the Mode Button (3) to
select the distance mode; then
press the Set/Reset Button (4) to
select the desired display. Hold the
Set/Reset Button down to reset the
trip meter.
8. Gear Position Indicator - Indicates
which gearshift position is selected.
• R (reverse)/N (neutral)/L (low range)/
H (high range)
„ NOTE: An E will be displayed if
there is an error caused by a no-
shift position signal.
9. High Beam Indicator - The High
Beam icon will appear only when
the headlights are on high beam.
10. Differential Lock Indicator - Dis-
plays LOCK when the differential
lock has been engaged.
11. Drive Select Indicator - Displays
4WD when selected by the drive
select switch or when the differen-
tial lock is engaged. The display is
blank when in 2WD.
12. Speedometer - Indicates the
approximate vehicle speed in miles
per hour (MPH) or kilometers per
hour (km/h).
„
NOTE: To change MPH/km/h dis-
play, press and release Mode But-
ton (3) until the icon (MPH/km/h)
appears; then press the Set/Reset
Button (4) to change the display.
13. Right Turn Signal - Will be dis-
played when the right turn signal is
selected.
14. Left Turn Signal - Will be displayed
when the left turn signal is selected.
Condition Warning Display - Uses
odometer/trip meter display of the LCD
to warn of a system error condition
requiring attention.
A. Volt - The LCD will go blank
except the word VOLT will flash
on the LCD whenever a low
voltage (< 9 DC volts) or a high
voltage (> 16 DC volts) is
detected. When voltage returns
to normal, the gauge must be
reset by turning the ignition key
to the OFF position and then to
the ON position.
B. EFI - The LCD will go blank
except the letters EFI will flash
on the LCD whenever an elec-
tronic fuel injection error is
detected. After 30 seconds, the
LCD will return to normal; how-
ever, the letters EFI will continue
to flash until the cause of the
error is corrected.
„
NOTE: Take the ATV to an autho-
rized Arctic Cat ATV dealer to have
the EFI error corrected and to have
the ECU reset as soon as possible.