Arctic Cat 550 H1 EFI, Руководство пользователя

Страница: 42 / 71

40
Hazard Lights Switch
ATV-004C
To activate the hazard lights, press and
release the hazard light switch. To deac-
tivate the hazard lights, press and
release the hazard light switch again.
Winch Switch
ACE-017
To release the cable, slide the toggle
switch to the left; to spool-in the cable,
slide the switch to the right.
Horn Button
ATV-004D
To activate the horn, press the horn but-
ton.
Starter Button
Pushing this button activates the starter
motor. Before starting the engine, make
sure the ignition switch is in the ON
position, the transmission is in neutral,
and the brake lever lock is engaged.
„
NOTE: This ATV has safety inter-
lock switches which prevent the
starter motor from activating when
the transmission is not in neutral.
Throttle Lever
FI475B
Control engine RPM with the position
of the throttle lever. Operate this lever
with the thumb. Pushing it forward
increases engine RPM and allowing it to
retract decreases engine RPM.
Throttle Limiter Screw
ATV-0053
Throttle lever travel may be limited by
adjusting the throttle limiter screw. The
throttle limiter should be adjusted
according to the operator’s skill and
experience. To adjust the throttle limiter,
use the following procedure.
1. Loosen the jam nut.
2. Turn the throttle limiter screw
clockwise to decrease engine RPM
maximum or counterclockwise to
increase engine RPM maximum.