Arctic Cat 550 H1 EFI, Руководство пользователя

Страница: 59 / 71

57
GE
NE
RAL M
AINTE
NANCE
AIR FILTER HOUSING
DRAIN
Inspect the “duck bill” drain in front of
the main housing for debris and for
proper sealing.
GZ018A
DRAINING V-BELT
COVER
CF110A
„
NOTE: If the ATV has been driven
through water, the V-belt cover must
be drained of any water.
1. Place the ATV on a level surface.
2. Remove the drain bolt from the
cover and allow the water to drain
out.
3. Shift the range lever to the neutral
position; then start the engine.
4. Increase and decrease engine RPM
several times to “blow out” any
water; then stop the engine.
5. Install the drain bolt and tighten
securely.
„
NOTE: The V-belt and pulleys
should be inspected every 500 miles
and the belt replaced (if necessary).
TIRES
Tire Tread Condition
The use of worn-out tires on an ATV is
very dangerous. A tire is considered to
be worn out when the depth of the tread
is less than 4 mm (5/32 in.). Be sure to
replace the tires before reaching this
minimum specification.
732-649A
Tire Replacement
The ATV has low-pressure tubeless
tires. Air is sealed by the contact sur-
faces of the inner wheel rim and the tire
bead. If either the inner wheel rim or tire
bead is damaged, air may leak. Be
extremely careful not to damage these
areas when replacing tires.
It is very important to use the proper
tools when repairing or replacing tires to
prevent damage to the tire bead or wheel
rims. If proper tools and related items
are not available, have this maintenance
performed by an authorized Arctic Cat
ATV dealer or a qualified tire repair sta-
tion.
! WARNING
Always use the size and type of tires
as specified. Refer to the Specifica-
tions chart for proper tire inflation
pressure, and always maintain
proper tire inflation pressure.
! WARNING
The use of worn-out tires can be
dangerous and can increase the
risk of an accident.