Arctic Cat 1000 Cruiser, Руководство по обслуживанию

Страница: 14 / 253

12
When filling the cooling system, use a coolant/water
mixture which will satisfy the coldest anticipated weather
conditions of the area in accordance with the coolant
manufacturer’s recommendations. While the cooling sys-
tem is being filled, air pockets may develop; therefore,
run the engine for five minutes after the initial fill, shut
the engine off, and then fill the cooling system to the bot-
tom of the stand pipe in the radiator neck.
Checking/Filling
1. On the 700/1000 models, remove the two screws
from the front of the radiator access panel. On the
500/550 models, remove the four screws securing
the radiator access panel.
FI465A
FI476
2. On the 700/1000 models, lift the front of the access
panel; then slide the panel forward to disengage the
two rear tabs.
3. On the 700/1000 models, move the panel rearward
until free of the rack. On the 500/550 models, move
the panel forward until free of the ATV.

NOTE: Steps 4-6 are for Mud Pro models; for other
models, proceed to step 7.
4. Remove four cap screws securing the snorkel hous-
ing to the front inspection panel; then remove two
cap screws from the rear of the snorkel housing.
MP006A
MP007A
5. Separate the front of the snorkel housing from the
rear; then remove the snorkel housing.
MP003
6. Remove two reinstallable rivets and remove the
splash guard. The radiator cap can now be accessed
in front of the snorkels.
7. Carefully rotate the radiator cap counterclockwise to
release pressure; then remove the cap.
CF142A
700/1000
500/550