147
GZ159
3. Lubricate the inside wall of the cylinder; then using a
ring compressor, compress the rings and slide the
cylinder over the piston. Route the cam chain up
through the cylinder cam chain housing; then remove
the piston holder and seat the cylinder firmly on the
crankcase.
GZ142
4. Loosely install the two nuts securing the cylinder to
the crankcase.
NOTE: The two cylinder-to-crankcase nuts will be
tightened in step 10.
GZ141A
GZ160A
5. Install the coolant hose onto the crankcase union and
tighten the clamp.
C. Cylinder Head
D. Valve Cover
NOTE: Steps 1-5 in the preceding sub-section must
precede this procedure.
6. Place the chain guide into the cylinder.
GZ161A
7. Place a new head gasket into position on the cylin-
der. Place the alignment pins into position; then
place the head assembly into position on the cylinder
while guiding the cam chain through the cylinder
head.
GZ151
CAUTION
The cylinder should slide on easily. Do not force the cyl-
inder or damage to the piston, rings, cylinder, or crank-
shaft assembly may occur.
CAUTION
Care should be taken that the bottom of the chain guide
is secured in the crankcase boss.
Содержание 1000 Cruiser
Страница 1: ...500 550 700 1000 MUD PRO TRV ATV SERVICE MANUAL 2014...
Страница 252: ...250 NOTES...
Страница 253: ...Printed in U S A Trademarks of Arctic Cat Inc Thief River Falls MN 56701 p n 2259 841...