arcelik K60365, Руководство по обслуживанию

Страница: 27 / 62

27
To dismantle the heater, first the plastic clamp connections are cut by using a side cutter. Finned
evaporator group is taken from the inner body rear wall and leant against the side wall. After seeing
the drain section clearly, the heater part will be taken out by holding from the sticky part of it.
6.7 Assembly/Disassembly of the Drawer Groups
The drawer groups used in our freezer compartment are serviced in two different ways,
namely; their covers and drawer sections. The process of removing the drawer cover from the
drawer body is performed in the order below:
The tab structures on the drawer cover are locked on the drawer body at the bottom part. The tabs
are loosened from their places by using two thin and flat-tipped tools. There are 4 tabs in total at the
bottom part
After loosening the bottom part, side parts will be handled. There are 2 tabs on the sides; one on the
left and one on the right. The tabbed structure is in the drawer body. These tabs are snapped on the
spaces on the drawer cover. To disconnect the tab connection, the tabs are removed from the
housings they are placed by using a pointed and flat tool as shown in the picture.
To attach them, first the upper and side tabs are snapped to the drawer body, and then they can be
mounted to the drawer body by snapping the tabs located at the bottom.