arcelik K60365, Руководство по обслуживанию

Страница: 13 / 62

13
actions. You may injure yourself or damage the appliance.
IMPORTANT!
To prevent cutting or damaging the power cable, make sure that the cable is not
pinched under the appliance during and after moving it.
3.2 Installation Instructions

Volume of the room where the product will be installed should not be less than 10 cubic
meters.

Do not install the appliance in a cold room where the temperature may fall below 10°C at
nights and/or especially in winter season.

This refrigerator/deep freezer has been designed to operate in ambient temperatures between
10°C and +43°C. For this reason, in case of installing the appliance in a cold place without
heating facility (e.g. garage outside the house), it will not operate and the freezer
compartment will get warmer which will end up with decreased preserving times for frozen
foods.

Do not install the appliance near ovens or radiators or under direct sunlight since they will
cause the appliance operate more difficultly. In case of placing the appliance near a heat
source or freezer, make sure that the following minimum clearances are provided.
From ovens 50 mm (2")
From radiators 300 mm (12")
From freezers 25 mm (1")
From the wall 50 mm (2")

Insert the 2 plastic wedges supplied in a pouch in the refrigerator onto the condenser as
illustrated in the following figure. Plastic wedges will provide the required distance between
your refrigerator and the wall in order to allow the air circulation.
3.3 Floor Balance Adjustment
If your refrigerator is unbalanced;