FORCED AIR
MILK COOLERS
REFRIGERATORS
Utilizing Environmentally Safe, CFC-free R-134a Refrigerant
Standard Features
•Unique Air Flow Curtain And Performance Rated,
R-134a Refrigeration System Designed To Keep Milk
Cold During Serving
•Modern, State-Of-The-Art Styling
•Available in Both Single(S) and Double(D) Service Access
•Cabinet Construction Consisting Of Stainless Steel Top,
Lid And Door, White Finish Steel Body and Galvanized
Steel Interior with Reinforced Stainless Steel Floor
•Non-Corrosive, Heavy Duty, Epoxy Coated Steel Wire
Floor Racks
•Heavy Duty, Stainless Steel Lid And Door Hinges and
Latches
•2" High Density, Non-CFC Polyurethane Foamed-In-Place
Insulation
•Easily Serviceable Rear Mounted Compressor
•Exterior Mounted, Easily Readable Dial Thermometer
•Snap-In Lid And Door Gasket
•Door Cylinder Security Lock
•Swivel Type, Heavy-Duty Casters (Front Locking)
•Automatic, Energy Saving, Non-Electric Condensate
Disposal With Easily Accessible, Convenient Cleanout
Floor Drain
•Extra Long, 10' Power Supply Cord And Plug Attached
Models Available
•MC3-S
•MC3-D
•MC4-S
•MC4-D
•MC5-S
•MC5-D
Optional Features & Accessories
•Stainless Steel Exterior
•Stainless Steel Interior
•Wrap Around Bumpers
•Corner Bumpers
•6" Adjustable Legs
•Floor Lock
MC3-S
REFRIGERATION SYSTEM
The self-contained refrigeration system is concealed
within an easily serviceable rear mounted, slide out
chassis. A bottom mounted full-length rear grill allows
for even air circulation to condensing unit. A "perform-
ance rated", hermetically sealed, capillary type refriger-
ation system is designed to keep milk cold during serv-
ing with a unique airflow curtain feature. All condensate
water is directed to an automatic non-electric conden-
sate vaporizer located in the compressor compartment.
A strict quality assurance team inspects all materials
and components to certify that each model conforms to
the most exacting standards. All models are perform-
ance tested for a minimum of 16 hours prior to crating
CABINET CONSTRUCTION
All materials are of top quality, and are assembled
under rigid supervision conforming to strict quali-
ty assurance requirements. Case is of all metal
welded construction and is internally supported
and braced for rigid unit construction. All cabinet
joints and seams are vapor-tight sealed.
INSULATION
All cabinet walls, top, bottom, lids and doors have
an average of 2" of high density, non-CFC,
polyurethane foamed in place insulation.
DOOR & LID CONSTRUCTION
Doors and lids are constructed of a heavy gauge
stainless steel and are internally braced and urethane
foam insulated for rigidity. Doors, lid hinges, and
latches are heavy duty and constructed of stainless
steel. All gaskets are self-adjusting and snap-in type,
creating a positive seal. Doors are provided with built
in cylinder security locks.
