Service Support Spirit
43
Unique Solution
WWW.ARCBRO.COM
10. EDIT Mode
In the system main menu, press [F3] to enter EDIT menu as shown in the figure below:
10.1. Description of EDIT Menu
10.1.1
【
F1
】
NEW
To establish a new program, i.e., clear the editing area of machining program and start to
edit a new machining program.
10.1.2
【
F2
】
LOAD
To load a program. Specifically, it is used to load a program into the user program area.
The system will tabularize the available program names and highlight the current
program name. Move the cursor key to select different programs. If ENTER key is
pressed, the highlighted program will be loaded into program editing area; if [ESC] key is
pressed, the load function will be abandoned.
10.1.3
【
F3
】
SAVE
To save program. After a program is edited and ready to save, the system will prompt:
Enter program name: 1234.TXT
PROG
editing area
Fig. 10.1 EDIT menu
Main menu of EDIT
PROG S/N
Esc key
