ARCA AIRPELLET, Техническое руководство

Страница: 59 / 61

glass ceramic fiber, the inner wall of the door and, if worn or too dry, order it from an Authorised
Service Centre.
54
Replacement of components
Replacement of glass
The stove is supplied with a ceramic glass of 4 mm thick, resistant to a thermal shock of 750 º C;
the glass may break only due to a strong impact, or to an incorrect use.
Never hit the door or the glass.
In the event of breakage replace only with an original calling the authorized Service Centre.
Annual maintenance charged to the service center.
These operations must schedule them annually Authorized Service Center and are necessary to
ensure which maintains the efficiency of the product, ensuring its operation in conditions of safety.
• Thorough cleaning of the combustion chamber;
• Cleaning and inspection of the duct leakage of flue gas ducts;
• Check the tightness of the seals;
• Cleaning of the mechanisms and moving parts, motors and fans of the auger;
• Control of the electrical and electronic components.
Operations to make each station prior to ignition.
• General cleaning inside and outside;
• Thoroughly clean the heat exchange pipes;
• Carefully clean and descale the brazier and the corresponding compartment;
• Clean engines, mechanical control, gaming and hardware;
• Cleaning the exhaust channel, replace the seals in the pipes, and smoke extractor fan
compartment;
• Cleaning the silicone tube connected to the pressure switch;
• Clean, inspect and descale compartment of the ignition coil, replace the same if it were
necessary;
• Cleaning, display control;
• Visual inspection of electrical cables, connections and power cord;
• Cleaning of the deposit of the pellet and worm-gear control group;
• Replacing the door seal combustion;
• Functional test, loads the cochlea, ignition, operation for 10 minutes on and off.
We suggest to make an annual maintenance contract with the
after-sales technical service authorized by the manufacturer