ARCA AIRPELLET, Техническое руководство

Страница: 45 / 61

2.8.1 M8-1 Settings factory
Once in the menu, with subsequent pressure on the P3 button you can scroll through all
the configuration parameters from PR01 to PR21). To change each parameter press P1
(decrease) or P2 (increase). To confirm press on P3, where the system stores the value
and the display will show the next parameter.
After having displayed the parameter PR21, press the button P3 to exit the menu.
2.8.2 M8-2 Other settings
This menu has additional parameters that can be set by pressing the button.
You can scroll through the P3 configuration parameters from PR38 to PR48 (see Appendix
A). Act to change the value of P1 or P2, and P3 press to confirm and continue.
After having displayed the parameter PR48, press the button P3 to exit the menu.
2.8.3 M8-3 Type of pellet
By acting on the buttons P1 and P2 varying the percentage of load pellets (PR54) (figure
32) with a value + 9 max and min -9. Every single step increases or decreases
approximately 3% the total period of the auger with respect to the default period (pellet
type = 0). The time T Auger-ON remains unchanged.
2.8.4 M8-4 Type of chimney
By acting on the buttons P1 and P2 changes the percentage of the turns of ventilation
fumes (PR55) with a value + 9 max and min -9 (Figure 33). Every single step increases or
decreases by about 3% the value of the smoke extraction speed compared to the
parameter set.
45