ARCA AIRPELLET, Техническое руководство

Страница: 54 / 61

2.8 Cleaning and maintenance
Before performing any maintenance on the stove, take the following precautions.
• Make sure that all parts of the stove are cold;
• Make sure that the ashes are completely extinguished;
• Make sure the power switch is in the OFF position;
• Disconnect the plug from the socket, to prevent accidental contact;
• Completed the maintenance phase, check that everything is in order as before maintenance, placing the
grate properly.
Please observe the following instructions for cleaning. Its default may cause problems in the operation of the
stove.
• DAILY: clean the grate combustion residues and reassembled correctly, the brazier (Figure -
73).CAUTION: Make sure, before any power, proper cleaning of the grate and clean the BRAZIER
thoroughly using a vacuum cleaner. To ensure proper operation, clean with particular attention to the area
around the spark plug.
• EVERY 2 DAYS: empty the ash from the combustion residues (Figure - 61).
• WEEKLY: Remove the brazier and suck from the space below the brazier, the residual ash (Figure - 72).•
EVERY 2 WEEKS clean the "T" at the mouth of the stove flue.
• MONTHLY: remove the back plate of the combustion chamber and clean the area thoroughly by all the ash
residues (Figures 62-63-64-65)
• MONTHLY: aspire to spent fuel, pellet powder deposited on the bottom of the tank.
• AT THE END OF WINTER OR WHENEVER IS NECESSARY TO: Perform a thorough cleaning of the
hearth and the back of the combustion chamber of the stove, using brushes and aspiraceneri.
• twice a year: clean all exhaust fumes including the chimney.The use of an aspirator simplifies the cleaning
of the ashes. Glass cleaning should be done with a damp cloth or with paper, moistened and placed in the
ashes, rubbing the glass until the cleaning. Do not clean the glass when the stove is lit.The cleaning of the
skin, must be carried out when the stove is cold and off, using a soft microfibre specifically for delicate
surfaces and moistened with water. Warning: this is normal a daily deposit of soot and combustion made on
the glass.
Cleaning of the combustion chamber, once a month.
With the stove cold stop, make the following:
Remove the scraper with the door closed.
Actuate 5 or 6 times the scraper pulling and pushing towards the stove to maintain the cleanliness of the
heat exchange tubes.
At the end of the operation leave pulled the lever to facilitate disassembly of the rear inner walls of the
combustion chamber.
fig 60 fig. 61