ARC FLEX EPV, Инструкция по эксплуатации

Страница: 24 / 72

Flex EPV Instruction Manual (CE)
April 2020 v1.0
Page 23 of 71
4.1.8 Pushbutton Function Settings
1) Rotate the power switch key to OFF ( 0 ) position..
2) With the STOP button elevated, press and hold PB3 and PB4 at the same time.
3) Rotate the power switch key to ON ( I ) position.
4) Let go PB3 and PB4 at the same time (entered Pushbutton Function mode).
5) The Status LED displays current pushbutton function setting with orange, green and
red blinks. An orange blink represents the hundreds (+ 1 00), a green blink represents
the tens (+0 1 0) and a red blink represents the units (+00 1 ), and constant orange
represents no function (000). For example, 1 orange blink followed by 2 green blinks
and 5 red blinks is pushbutton function no. 1 2 5 . Pushbutton function number with “0”
is represented by no orange, green or red blink. For example, 1 orange blink
followed by 5 red blinks is pushbutton function no. 1 0 5 .
6) Set pushbutton function number by pressing PB3 to increment the hundreds (+ 1 00),
PB2 to increment the tens (+0 1 0), PB1 to increment the units (+00 1 ), and PB4 to reset
(000 - constant orange). For example, press PB3 one time, PB2 four times, PB1 six
times is pushbutton function no.
1 4 6 (Status LED blinks 1 orange, 4 greens and 6 reds)
7) Exit Pushbutton Function mode by rotate the power switch key to OFF ( 0 ) position.
4.1.8.1 Toggled Pushbutton with LED Indication
Set pushbutton toggled function with LED indications. LED 1 ~ 4 shown inside the
shaded box illustrates which LED on the transmitter lights up when the designated
pushbutton is pressed.
Function
Number
Display Type PB1 PB2 PB3 PB4
1
1 Red Normal Normal Normal LED 4
2 2 Reds Normal Normal LED 3 LED 4
3
3 Reds Normal LED 2 LED 3 LED 4
4
4 Reds LED 1 LED 2 LED 3 LED 4