manualshive.com logo in svg

ARC FLEX EPV, Инструкция по эксплуатации

Поделиться
Скачать
ARC FLEX EPV Скачать руководство пользователя страница 49

 

Flex EPV Instruction Manual (CE) 

April 2020 v1.0 

Page 48 of 71 

A     V

 

 

4.2.6.17  PB3 & PB4 Analog Output Programming (PB3&4 ANALOG)

 

This function requires transmitter pushbuttons (in pairs) configured to proportional 
stepless pushbuttons and their designated receiver outputs equipped with the analog 
module. 

 
 
 
 
 
 
 
 
 
 

1)  Press the ENTER button to enter analog output type setting (cursor shown next 

to VOLTAGE, CURRENT or OFF). 

2)  Press the UP/DOWN buttons and then the ENTER button to scroll and select between 

Voltage Outputs, Current Outputs or Off (analog outputs disabled).   

 

Voltage Outputs:  

 

3)  Press the UP/DOWN buttons and then the ENTER button to scroll and select 

between Minimum, Neutral and Maximum voltage outputs (cursor shown under the 
first digit to the far left).  Press the UP/DOWN buttons to scroll and select voltage 
value, and then the ENTER button to go to the next digit to the right.  Press the 
ENTER button repeatedly to cycle through the 3-digit voltage value.  Press the 
UP/DOWN buttons to change value.   

4)  Press the BACK button to return to step #3 above.  Press it again to go back to 

step #1.  Press it again to go back to PB3 & PB4 Analog Output Programming 
(cursor shown next to PB3&PB4 ANALOG). 

5)  Press the UP/DOWN buttons to scroll through other system settings. 

 

* Make sure the selector switch on analog module is set to “V” position  

for voltage outputs. 

 
 

Current Outputs:  

 

6)  Press the UP/DOWN buttons and then the ENTER button to scroll and select 

between Minimum, Neutral and Maximum current outputs (cursor shown next to the 
2-digit current value).  Press the UP/DOWN buttons to scroll and select current 
output value. 

7)  Press the BACK button to return to step #6 above.  Press it again to go back to step 

#1.  Press it again to go back to PB3 & PB4 Analog Output Programming (cursor 
shown next to PB3&PB4 ANALOG). 

8)  Press the UP/DOWN buttons to scroll through other system settings. 

 

* Make sure the selector switch on analog module is set to “A” position  

for current (amperage) outputs. 

 
 
 
 

>PB3&4 ANALOG 

VOLTAGE 

   MAX 10.0V 
   NEU 00.0V 
   MIN 10.0V 
 
 
UP   DOWN   ENTER   BACK 

>PB3&4 ANALOG 

CURRENT 

   MAX 20mA 
   NEU 00mA 
   MIN 20mA 
 
 
UP   DOWN   ENTER   BACK 

>PB3&4 ANALOG 

OFF 

    
 
 
 
 
UP   DOWN   ENTER   BACK 

A     V

Содержание FLEX EPV









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды