Flex EPV Instruction Manual (CE)
April 2020 v1.0
Page 65 of 71
6.4 A/B Pushbutton Select Operation
Press the “A/B” pushbutton repeatedly toggles between output relay A, B
and A+B respectively. There are 4 different types of Select A/B sequence
available (refer to section 4.1.8.2).
Standard
– Output relay A activated at A position, output relay B
activated at B position, both output relays activated at A+B
position.
Reversed logic
– Output relay A activated at B position, output
relay B activated at A position, both output relays deactivated
at A+B position. Refer to section 4.2.3 and 4.2.6.22 JP3 jumper
function descriptions and programming.
6.5 A/B Rotary Select Operation (AB models)
Standard
– Rotate to A position activates output relay A, rotate to
B position activates output relay B, rotate to A+B position activates
both output relays.
Reversed logic
– Rotate to A position activates output relay B,
rotate to B position activates output relay A, rotate to A+B position
deactivates both output relays. Refer to section 4.2.3 and
4.2.6.22 JP3 jumper function descriptions and programming.
6.6 Pitch & Catch Operation
Press the “PITCH” pushbutton for up to 2 seconds to release
control of the receiver. After 2-second grace period, rotate the
power switch key to START position for up to 2 seconds to gain
control of the receiver. The 2
nd
operator is unable to take control
of the receiver unless the 1
st
operator presses the “PITCH”
pushbutton. Refer to section 4.2.1.10, section 4.2.2.4 and
section 4.2.6.10 ~ 4.2.6.15 pitch and catch descriptions and
programming.
6.7 Transmitter Access Card (TAC) Operation
After turning on the transmitter power, place the TAC
directly over the RFID marking located on the backside
of the transmitter. A 2-second green on the Status LED
represents access card accepted. Status LED with red
blinks represents invalid access card. Then rotate the
power switch key to the START position for up to 2
seconds to begin operation. TAC is not required after
every transmitter inactivity restart, only during initial
transmitter power on.
Содержание FLEX EPV
Страница 1: ...FLEXEPV Instruction Manual ...
