Crossover 2 (X2)
High Pass = 115Hz-4900Hz
Low Pass = 115Hz-4900Hz
Band Pass Low= 16Hz-710Hz
Band Pass High=115Hz-4900Hz
12dB per Octave
Crossover Mode;
Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the
Range Menu
.
Tap the Select button until you reach the
X2 Mode
:
Turn the knob either direction to Select;
HIGH
,
LOW
,
BAND
or
FULL
Crossover Frequency
Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the
Frequency Menu
.
Tap the Select button until you reach the
X2 HP:
(High Pass) or
X2 LP:
(
Low
Pass)
Frequency.
Turn the knob either direction to raise or lower the Frequency.
Note:
In High Pass or Low Pass the Band Pass frequency option will not be available for
adjustment.
Band Pass Mode Frequency Adjustment
Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the
Frequency Menu
.
Tap the Select button until you reach the
X2 Hi:
Turn the knob either direction to raise or lower the Frequency.
Note:
This will adjust the point this crossover begins to filter out the High Frequencies.
Tap the Select button until you reach the
X2 Low:
Turn the knob either direction to raise or lower the Frequency.
Note:
This will adjust the point this crossover begins to filter out the Low Frequencies.
Gain Adjustments
Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the
Gain Menu
.
Tap the Select button until you reach the
X2 Level
:
Turn the knob either direction to increase or decrease the Gain.
Source Assignment
Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the
Source Menu
.
Tap the Select button until you reach the
X2 SRC
:
Turn the knob either direction to set the High Pass as
Front
or
Rear
.
14
