To Change the Presets,
The DXE has six memory presets. With six different system
configurations, almost anything is possible.
Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until
you get to the
Presets
menu.
Turn the knob either direction to select the
Preset
you wish.
Tap the Select button to Recall the setting saved in this
Preset
.
Note:
No need to save your settings before you e xit. They will be saved
automatically
Personal Options Menu
Hold down the select button while you turn the unit on.
Use the knob to select from the following options.
Splash Screen
Credits
VER.1.00
Factory Defaults
To Change the (Welcome)
Splash Screen
Hold down the select button while you turn the unit on.
Use the knob to move between letters.
When you have the letter you wish to change highlighted
push the button to select it.
Turn the knob up or down to change the letter.
Push the knob to set the new letter in place
Use the knob to move to the next letter.
When you are finished push and hold the button for 2 seconds to return to
the Crossover menus.
Factory Default
In the event that the unit should stop responding to commands or b ecome
unstable you can reset the processor by using the
Factory Defaults
command.
Software Version Information
This menu provides the Software version and date coding information.
This information may be necessary to receive service.
16
