Features:
1. Fully balanced signal from EQ unit to Crossover.
2. Green dot matrix display remote controller for setting output levels,
crossover range and configuration of control unit.
3. Front-Rear fader.
4. Back lit knobs (Blue).
5. Dual input.
6. Five filters with adjustable center frequency.
7. Selectable input gain.
8. Microprocessor controlled.
9. 12/24 high pass output.
10. Two 12 dB band pass crossovers.
11. Full range summed center channel.
12. Summed Sub out with 10 dB of gain (bass Boost).
13. Sub Crossover has 12,24,48 dB and full options. 0 or 180 phase switch on
sub out.
14. High pass, Sub, Bandpass 1&2 are addressable to front or rear Fader
outputs.
15. Low noise NE5532 IC’s
16. Digitally controlled potentiometers and analog switches.
P
arametric Equalization Controls:
The DXE includes a fully adjustable parametric equalizer. With a parametric EQ you can select a
center frequency, and apply the appropriate amount of boost or cut.
Digital-Hybrid Four-way Crossover:
With digital control, the four -way electronic crossover in the DXE easily configures to optimize
almost any audio system. By simply pressing a few buttons, you can select almost any crossover
frequency imaginable. This state-of-the-art crossover offers the greatest flexibility available in an
analog crossover.
Non-volatile memories:
The DXE has the ability to allow the user to set and store up to six
different crossover profiles in individual memory loca tions. This memory is completely non-
volatile, meaning you will never loose your setting even if the unit is disconnected from power for
a prolonged period of time.
2
