The DXE Menus
1: Freq Menu
1: Sub: 65.4 Hz
2: X2 HP 0115 Hz
3: X2 (HP)
4: X3 Hi: 3508 Hz
5: X3 Low: 0075 Hz
6: HP: 3508 Hz RH
2: Gain Menu
X2 Level: -04dB
X3 Level: -00dB
Ctr level: -90dB
Sub Level: +10dB
HP Level: -00dB
3: Range menu
X2 Mode: High
X3 Mode: Band
Sub Slope: 24dB
HP Slope: 24dB
Sub Phase: 0
HP Range: High
4: Source menu
X2 SRC: REAR
X3 SRC: FRONT
SUB FRONT+REAR
HP SRC: FRONT
5: Preset: 2
The Frequency Menu adjusts all the
crossover points that are available in
the current configuration.
In this example X2 is in high pass so
the Low frequency is not displayed.
All output gains are adjusted here.
The Sub Level has a +10db boost.
All the remaining output level range
from –90dB to –00dB.
In the Range Menu you select
crossover types and slopes. You can
also change the sub phase 0 or 180.
Select Front or Rear output. This
sets the fader control from the EQ.
Only the Sub channel has the
Front + Rear option.
To change to a new preset turn the
rotate the knob to bring up the preset
you wish to use then just tap the
button once.
When the menu changes the old
settings will be saved automatically.
17
