ARANA FOGATTI FS06B1, Инструкция по установке и эксплуатации

Страница: 58 / 68

EN
58
sales service provider for maintenance. The serviceman will remove the burner with
the jets facing down, using a bristled brush to remove the carbon.
Method#1：
7.2 Maintenance instructions
7.3 The way to set minimum heat load
Clean the unit regularly. Do not use chemical lotion and volatile solvents.
To ensure better performance, please clean the air intake grill, dust filter and exhaust
port regularly. This ensures there is no obstruction of the flow of combustion and
ventilation air.
To remove the air intake filter: open the panel, remove four thumbscrews. Clean with
water.
Turn off the water inlet, remove water inlet pipe, clean the filter and reinstall.
Drain water from the RV regularly and flush the heat exchanger with an approved
detergent.
Wipe the display with a damp cloth. Do not use gasoline or grease detergents to
avoid shape changes.
When travelling on dusty roads please check and clean the interior of the water
heater and blow excess dust away carefully using a compressed air gun. Excessive
build up of dust can affect the operation of this unit, it is your responsibility to keep
the units interior clean.
Keeping appliance area clear and free from combustible materials, gasoline, and
other flammable vapours and liquids.
There is a hot water scald potential if the thermostat is set too high.
Should overheating occur or the gas supply fails to shut off, turn off the manual
gas control valve to the appliance.
Caution: Label all wires prior to disconnection when servicing. Wiring errors can
cause improper and dangerous operation. Verify proper operation after servicing.