ARANA FOGATTI FS06B1, Инструкция по установке и эксплуатации

Страница: 55 / 68

Make A Difference 卓 / 尔 / 不 / 凡
EN
55
Fault treatment: When the water heater fails, the display will show the fault code, and
the buzzer will continuously issue alarms "B, B, B". Please follow the table below for
the corresponding treatment.
6.0 Fault judgment and processing
The outlet temperature probe is open or shorted.
Unexpected flameout failure, accidental flameout during work.
Fan failure, no fan signal detected during start-up or water heater
operation.
Wind pressure switch failure, when the power is turned on for 5
seconds, the wind pressure switch is closed or the wind pressure
is continuously disconnected for 2 seconds.
Water heater set timer time to ("nE" is set to open).
Ignition failure, no ignition. Please check whether the gas is
supplied normally and check it before use.
The thermostat malfunctions, and the temperature control is
detected during the start-up or water heater operation.
The inlet temperature probe is faulty and the inlet temperature
probe is open or shorted.
Before normal combustion, the main valve opens or is shorted;
the proportional valve opens.
In normal combustion, the main valve opens or is shorted; the
proportional valve opens.
Over-temperature fault.
The display will show faulty code when the water temperature
remains continuously for 3 seconds at more than 60℃ (140° F).
Please check if the water supply pressure is too low.
E0
E2
E5
E8
EN
E1
E3
E4
E7
E6
Error code Failure description and treatment