ARANA FOGATTI FS06B1, Инструкция по установке и эксплуатации

Страница: 36 / 68

EN
36
and gas of the water heater in a coordinated manner, and controls the output
water temperature to the selected temperature.
Low water pressure startup: Low water pressure at startup and it will be easier
to use.
Flameout protection: When the water heater accidentally flames out during
use, it can automatically cut off the gas to ensure that the gas will not leak.
Speed changing and wind resistance function: When there is a blockage of
the flue or the exhaust is blocked, the built-in microcomputer system will increase
the running speed of the fan and eliminate the generation of harmful gases. When
the speed reaches the predetermined maximum speed, the microcomputer
system will issue the cease-gas and cease-fire instruction to effectively safeguard
the heater and occupants.
Water and gas linkage control: When the water supply is interrupted or
the water outlet valve is closed, the water heater will automatically stop the
combustion and shut down.
Outlet water temperature display: with outlet water temperature display.
Frost protection function: When the temperature of the water pipe in the water
heater is lower than 6±1° C (43° F±2° F), the line controller will display " Fd "
character, the machine will start ignition and run with a certain load, the water
heater will automatically shut down after the whole machine runs for 5 seconds.
When the water temperature in the working water heater reaches 32±1° C
(90° F±2° F), it will shut down automatically.
After shutdown, wait for 3 minutes self-testing. When the temperature is lower
than 6±1℃ (43° F±2° F) or antifreeze thermostat control stops working, it will
start to run again.
In the process of starting the antifreeze function, when a fault occurs, the
corresponding fault is reported and the corresponding code is displayed. After
15 minutes, the system automatically clears the fault code. If the antifreeze start
condition is still met, the antifreeze will automatically start again.