© 2020 Araknis Networks
®
90
Araknis Networks AN-210/310-SW-F/R Manual
Product Manual
Table of Contents
SNMP Community List
Figure 60.
SNMP Community List
•
Community Name –
Enter a name to describe the community.
•
Community Mode –
Select Basic or Advanced
•
Group Name –
Select the group that community belongs to. You must configure a group before
configuring this setting.
•
View Name –
Select All or a specific user. You must configure a user before configuring this setting.
•
Access Rights –
Select Read Only or
•
Delete –
Click the trash can icon then click
Apply
to delete an entry.
•
Add –
Click to create a new entry. Remember to click
Apply
to save the new settings.
User List
Figure 61.
SNMP User List
•
User Name –
Enter a name for the user.
•
Group Name –
Select which group the user is a part of. You must configure an SNMP group before
configuring this setting.
•
Privilege Mode –
•
NoAuth –
No authentication or privacy for group members.
•
Auth –
SNMP messages are authenticated.
•
Priv –
SNMP messages are encrypted.
•
Authentication Protocol –
MD5 or SHA.
•
Authentication Password –
Enter the password for user authentication.
•
Encryption Protocol –
Select whether to use DES encryption with
Priv
privilege level messages.
•
Encryption Key –
Enter a key for DES encryption. Minimum 8 characters long.
•
Delete –
Click the trash can icon then click
Apply
to delete an entry.
•
Add –
Click to create a new entry. Remember to click
Apply
to save the new settings.
Configure SNMP community strings used to
authorize access by SNMP v1 and v2c clients
should be listed in the SNMPv3 Communities
Configuration table. For security reasons, you
should consider removing the default strings.
Содержание 210 Series
Страница 103: ...200922 2000 ...
