manualshive.com logo in svg

araknis 210 Series, Руководство по эксплуатации продукта

Поделиться
Скачать
araknis 210 Series Скачать руководство пользователя страница 31

© 2020 Araknis Networks

®

31

Araknis Networks AN-210/310-SW-F/R Manual

Product Manual

Table of Contents

7 - PoE Settings

The switch is designed to make PoE a plug-and-play affair for most applications. Use the PoE Settings menu 
to monitor, troubleshoot, and control each port.

Figure 12. 

PoE Settings Menu

• 

Enable –

 Check the box to enable PoE on the specified port.

Default: Enabled

• 

Port –

 The number of the physical switch port.

• 

Power Limit Type –

 Auto, 7W, 15.4W, or 30W.

Default: Auto

• 

Priority –

 Port priority is used when remote devices require more power than the power supply can 

deliver. In this case, the ports with the lowest priority will be turned off starting from the port with the 
highest port number. Low, Medium, or High.

Default: Low

• 

Status –

 

• 

Detecting –

 The port is not providing PoE power and waiting for a connection that requires it. If a 

device is connected and status is still Detecting, then the device is not powered via PoE.

• 

Delivering –

 The port is connected to a PoE device and power is being provided.

• 

Class –

 PoE Class of the connected device (1,2,3, or 4).

• 

Output Voltage (V) –

 PoE voltage being supplied to the port.

• 

Output Current (mA) –

 Current in milliamps being supplied to the port.

• 

Output Power (W) –

 Power in watts being supplied to the port.

• 

Power Cycle –

 Check the box and click 

Apply

 to power cycle PoE on one or more ports.

Содержание 210 Series








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды