manualshive.com logo in svg

araknis 210 Series, Руководство по эксплуатации продукта

Поделиться
Скачать
araknis 210 Series Скачать руководство пользователя страница 66

© 2020 Araknis Networks

®

66

Araknis Networks AN-210/310-SW-F/R Manual

Product Manual

Table of Contents

OUI Settings

The Organizationally Unique Identifier (OUI) is the first half of a device MAC address, and is unique for every 
phone manufacturer. The OUI is used to automatically detect packets from the phone and send them to the 
Voice VLAN. The included values are very popular, and new values may be added.

Figure 26. 

Voice VLANS OUI Settings

• 

Index –

 Identifier for the OUI.

• 

OUI Address –

 Portion of the MAC address used to identify different brands of IP phones.

• 

Description –

 Phone system name.

• 

Delete –

 Click the trash can icon then click 

Apply 

to delete an entry.

• 

Add –

 Click to create a new entry. Remember to click 

Apply

 to save the new settings.

Port Settings

Configure port-based Voice VLAN settings.

Figure 27. 

Voice VLANS Port Settings

• 

Port –

 Switch port identifier.

• 

State –

 Enable or disable Voice VLAN tag examination on the port.

• 

CoS Mode –

 Select the Class of Service (CoS) mode. Options:

• 

Src –

 Only packets from the source MAC address are given QoS prioritization on the Voice VLAN.

• 

All –

 All packets on the Voice VLAN are given QoS prioritization.

• 

Operate Status –

 Displays the current operating status of the Voice VLAN feature on the port.

Содержание 210 Series








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды