araknis 210 Series, Руководство по эксплуатации продукта

Страница: 89 / 103

© 2020 Araknis Networks
®
89
Araknis Networks AN-210/310-SW-F/R Manual
Product Manual
Table of Contents
SNMP – Lists
Configure SNMP groups, events, community strings, and users.
Group Lists
Figure 58. SNMP Group List
• Group Name – Enter a name to describe the group.
• Security Mode – Select the SNMP version for the group. Options: v1, v2c, or v3
• Security Level – Select the security level for users in the group. Options:
• NoAuth – No authentication or privacy for group members.
•
Auth –
SNMP messages are authenticated.
•
Priv –
SNMP messages are encrypted.
• Read View – All; cannot be changed.
• Write View – Select None or All.
• Notify View – Select None or All.
• Delete – Click the trash can icon then click Apply to delete an entry.
• Add – Click to create a new entry. Remember to click Apply to save the new settings.
View List
Figure 59. SNMP View List
• View Name – Enter a name to identify the View.
• Subtree OID – Enter the Subtree Object Identifier (OID) value (must begin with a “ . ”). This value identifies
an MIB tree that will be granted or denied access by the SNMP manager. Max level: 20
• Subtree Mask – Enter 0 (zero) for does not concern, or 1 for is concerned.
• View Type – Select Included or Excluded.
• Delete – Click the trash can icon then click Apply to delete an entry.
• Add – Click to create a new entry. Remember to click Apply to save the new settings.
Configure different SNMP groups to allow users
differing levels of SNMP privileges.