manualshive.com logo in svg

araknis 210 Series, Руководство по эксплуатации продукта

Поделиться
Скачать
araknis 210 Series Скачать руководство пользователя страница 52

© 2020 Araknis Networks

®

52

Araknis Networks AN-210/310-SW-F/R Manual

Product Manual

Table of Contents

Querier Settings

IGMP Query can be used to ask connected clients if they want to receive a specific multicast service. Then 
the ports containing clients requesting to join the service are identified, and multicast data is sent to only 
those ports. It then broadcasts the service request to any neighboring multicast switch to ensure that it will 
continue to receive the multicast service from a server connected to that switch.

Figure 8. 

IGMP Snooping Querier Settings

• 

VLAN ID –

 VLAN identifier.

• 

Querier State –

 Enable to make the switch the querier for the VLAN. Typically used when there is no 

multicast router acting as the querier.

Default: Disabled

• 

Querier Version –

 Select IGMPv2 or v3 IGMP Snooping support (regardless of what clients support).

• 

Querier Status –

 Displays whether the switch is currently acting as the querier for the VLAN.

• 

Querier IP –

 IP address of the switch acting as querier for the VLAN.

• 

Robustness –

 Variable for resending querier messages. A higher value means that packets will be resent 

more often, useful for congested networks.

Default: 2

• 

Interval –

 How often the switch sends IGMP host querier messages.

Default: 125 seconds

• 

Oper Interval –

 Current reported IGMP host querier message interval.

• 

Max Response Interval –

 Maximum response time advertised in IGMP queries. This value must be lower 

than the query interval.

Default: 10 seconds

• 

Oper Max Response Interval –

 Current reported maximum response time.

• 

Last Member Query Counter –

 Number of times the switch sends an IGMP query, separated by the last 

member query response interval, in response to a host leave message from the last known active host on 
the subnet. It is recommended to leave this setting at 2 in order to avoid multicast issues.

Default: 2

• 

Oper Last Member Query Counter –

 Current reported Last Member Query Counter value.

• 

Last Member Query Interval –

 Time to wait  after receiving a host leave message from the last known 

active host on the subnet. If no reports are received in the interval, the group state is deleted. Use this 
value to tune how quickly the software stops transmitting on the subnet.

Default: 1 second

• 

Oper Last Member Query Interval –

 Current reported Last Member Query Interval.

Содержание 210 Series








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды