manualshive.com logo in svg

araknis 210 Series, Руководство по эксплуатации продукта

Поделиться
Скачать
araknis 210 Series Скачать руководство пользователя страница 67

© 2020 Araknis Networks

®

67

Araknis Networks AN-210/310-SW-F/R Manual

Product Manual

Table of Contents

10 - Security – Port Mirroring

Port mirroring is used to send a copy of packets received on one switch port to a network monitoring 
device/software on another switch port. This is commonly used for network appliances that require 
monitoring of network traffic. Network engineers or administrators use port mirroring to analyze and 
diagnose errors on a network.

Figure 28. 

Port Mirroring Page

• 

Session ID –

 Session identifier.

• 

Enable –

 Check to enable a port mirroring session.

• 

Destination Port –

 Port that packets will be mirrored to.

• 

Source TX Port –

 Port that sent the original packets.

• 

Source RX Port –

 Port originally receiving the packets.

• 

Ingress State –

 Enable or disable.

11 - Security – 802.1x

802.1x allows port-based client authentication with the use of a RADIUS server.

802.1x Global Setting

Configure global 802.1x settings.

Figure 29. 

802.1x Global Settings Menu

• 

State –

 Enable or disable the 802.1x feature.

• 

Guest VLAN –

 Enable or disable guest VLAN use for 802.1x. If enabled, all authorized clients will be 

connected to the VLAN.

• 

GUEST VLAN ID –

 Select a VLAN ID for use if Guest VLAN is Enabled.

Содержание 210 Series








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды