83
18
TECHNICAL DATA
DESCRIPTION
BRAVO 400S LT
Display
LCD 5,7", 65000 colors, 500 cd/m
2
Rated supply voltage
12 Vdc (9 ÷ 15 Vdc)
Consumption (valves excluded)
0.5 A @ 12 Vdc
Operating temperature
0 °C ÷ 45 °C
+32 °F ÷ +113 °F
Storage temperature
-10 °C ÷ 60 °C
14 °F ÷ +140 °F
Weight (without cables)
1300 g (code 4674L0701)
1720 g (code 4674L0713)
Digital inputs
for open collector sensors: max 2000 pulses/s
Analog inputs
4 ÷ 20 mA
Spraying activation input (SERVICE IN)
active low
Spraying status output (SERVICE OUT)
•
No. 2 Camera inputs
PAL
No. 2 Serial ports RS232
up to 115200 baud
SD card reader
•
N. 2 USB 2.0 ports
HOST
GPS receiver power supply
12 Vdc (max 300 mA)
Power supply for cameras
max 300 mA
Protection against polarity inversion
•
Protection against short-circuit
•
19
END-OF-LIFE DISPOSAL
This device contains a lithium polymer battery that, at end of life, must be disposed of according to the prevailing rules.
Should it be necessary to replace the battery, do not disassemble the device but contact ARAG directly.
The device must be used and stored at the temperature indicated in chapter "Technical data" of this manual.
Excessive temperature oscillations may cause acid leakage, overheating, explosion or self-combustion of the battery and
consequent injuries and/or damage to persons.
Do not open, remove, drill or throw the device in the fire.
In case of battery leakage and accidental contact with the leaked out fluids, thoroughly rinse the concerned area and seek
immediately medical advice.
20
GUARANTEE TERMS
1. ARAG s.r.l. guarantees this apparatus for a period of 360 days (1 year) from the date of sale to the client user (date of the goods delivery
note).
The components of the apparatus, that in the unappealable opinion of ARAG are faulty due to an original defect in the material or produc-
tion process, will be repaired or replaced free of charge at the nearest Assistance Center operating at the moment the request for interven-
tion is made. The following costs are excluded:
- disassembly and reassembly of the apparatus from the original system;
- transport of the apparatus to the Assistance Center.
2. The following are not covered by the guarantee:
- damage caused by transport (scratches, dents and similar);
- damage due to incorrect installation or to faults originating from insufficient or inadequate characteristics of the electrical system, or to
alterations resulting from environmental, climatic or other conditions;
- damage due to the use of unsuitable chemical products, for spraying, watering, weedkilling or any other crop treatment, that may damage
the apparatus;
- malfunctioning caused by negligence, mishandling, lack of know-how, repairs or modifications carried out by unauthorized personnel;
- incorrect installation and regulation;
- damage or malfunction caused by the lack of ordinary maintenance, such as cleaning of filters, nozzles, etc.;
- anything that can be considered to be normal wear and tear;
3. Repairing the apparatus will be carried out within time limits compatible with the organizational needs of the Assistance Center.
No guarantee conditions will be recognized for those units or components that have not been previously washed and cleaned to remove
residue of the products used;
4. Repairs carried out under guarantee are guaranteed for one year (360 days) from the replacement or repair date.
5. ARAG will not recognize any further expressed or intended guarantees, apart from those listed here.
No representative or retailer is authorized to take on any other responsibility relative to ARAG products.
The period of the guarantees recognized by law, including the commercial guarantees and allowances for special purposes are limited, in
length of time, to the validities given here.
In no case will ARAG recognize loss of profits, either direct, indirect, special or subsequent to any damage.
6. The parts replaced under guarantee remain the property of ARAG.
7. All safety information present in the sales documents regarding limits in use, performance and product characteristics must be transferred
to the end user as a responsibility of the purchaser.
8. Any controversy must be presented to the Reggio Emilia Law Court.
21
EU DECLARATION OF CONFORMITY
The declaration of conformity is available at the website www.aragnet.com, in the relevant section.
MAINTENANCE / DIAGNOSTICS / REPAIRS
