51
Exit the function
or data change
Confirm access
or data change
Scroll
(LEFT /
RIGHT)
Delete
selected
character
Data
decrease
of data
Scroll
(UP /
DOWN)
Enter
selected
character
Par.
USE
Fig. 124
• In the job menu, set the tank level with the function Tank (par. 15.1).
• Start spraying by acting on the main valve control.
• Start moving along the field perimeter.
MARKING POINTS A AND B
Mark A ?
Mark B ?
Fig. 125
• While moving along the perimeter of the field, you will mark points A and B
(as described in par. 16.7 F7 New AB).
This operation is fundamental for the monitor to guide you,
during spraying, along tracks parallel to the reference track obtained by
marking points A and B.
We recommend marking points A and B while the machine is
moving, at both ends of a straight line that is as long as possible:
the longer the line marked by points A and B, the lower the error
caused by any deviations of the machine itself.
T0
Fig. 126
• Once the line from A to B has been marked (
T0
), it will be possible to
spray the rest of the field along parallel lines, (Fig. 126), by following the
reference tracks shown on the display (Fig. 127).
T0
Fig. 127
To change driving mode see function
Guidance mode (par. 16.2).
