ARAG Bravo 400 S LT Series, Использование и обслуживание

Страница: 78 / 84

78
Exit the function
or data change
Confirm access
or data change
Scroll
(LEFT /
RIGHT) Delete
selected
character Data
decrease
of data Scroll
(UP /
DOWN) Enter
selected
character
Par.
8.4
"JOB FUNCTIONS" - F7 NEW AB
16.7
F7
New AB
Saves two points A and B on the field, which the monitor uses to draw a line that will act as a
reference track (
T0
, Fig. 221) for the current spraying.
1
2
3
Fig. 219
1
In the guidance screen, press Func.
2
Drive along the stretch you wish to use as a reference for the spraying.
Press
F7
to enable the function: the request
Mark A?
will appear on the display. (Fig. 219).
3 Press
OK
. The display shows the message
Drive!
(Fig. 220).
4
Keep driving, when you have reached the minimum distance (30 m / 95.5 ft), the request
Mark B?
will appear on the display.
Press
OK
.
The reference track
T0
and all tracks to be followed during the spraying will appear on the display (Fig. 221).
We recommend marking points A and B while the machine is moving, at both ends of a straight line that is as long as
possible: the longer the line marked by points A and B, the lower the error caused by any deviations of the machine
itself.
A
Fig. 220
4
T0
B
Fig. 221
When this function is used, the monitor deletes the previous reference track
T0
(if present), and prompts the operator to save two NEW points
A
and
B
on the
field, which create a NEW reference track.
WARNING:
Points
A
and
B
can be marked only when the vehicle is moving.
The previous track
T0
cannot be restored.
30 m / 95.5 ft