Arachnid galaxy 3, Руководство оператора, Страница: 19 / 36

14 Galaxy 3 Operating Manual
C. Communications
Connections Setup: This section is where we choose the
type of device we are using to communicate with the
league system.
Ethernet Setup: This setup is for using an
ethernet cable and plugging directly into a router
or the highspeed internet modem.
Enabled: Toggle this on or off to enable or disable
ethernet communications.
Use Internet: Toggled to YES, you are
informing the Galaxy 3 that you want to use the
etherenet to talk to LeagueLeader.
IP Setting: This option allows you to choose
whether to manually enter in Internet information
or let it automatically find it for you.
IP Address: This is the address that your Galaxy
3 uses to access the Internet. If you chose Manual
under Auto/Manual , you will need to set an IP
Address manually.
Netmask: Provided by your Internet
provider.
Gateway: Provided by your Internet
provider.
DNS Server 1: Provided by your Internet
provider.
DNS Server 2: Provided by your Internet
provider.
WIFI Setup: If you have installed a WIFI
Modem, this menu allows you to change the
settings of your wireless network.
Access Point: This is the name of the wire-
less access point connected to your Galaxy 3
machine.
Security Type: This is the security type
for your wireless access point. You can
choose either WEP, WPA TKIP, WPA2 AES
or None.
Note: The Galaxy 3 will only work with the
listed Security types. If the router isn’t set to
one of the security types listed, it will not
work.
Security Key: This is the “password”
used when connecting to a secure wireless
network. Both access point and Galaxy 3
must have the same key in order to work.
Use Internet: Toggled to YES, you are
informing the Galaxy 3 that you want to use
the ethernet to talk to LeagueLeader.
IP Setting: This option allows you to
choose whether to manually enter in Internet
information or let it automatically find it for
you.
IP Address: This is the address that your
Galaxy 3 uses to access the Internet. If you
chose
Manual under Auto/Manual , you will
need to set an IP Address manually.
Netmask: Provided by your Internet
provider.
Gateway: Provided by your Internet
provider.
DNS Server 1: Provided by your Internet
provider.
DNS Server 2: Provided by your Internet
provider.
Modem Setup: If you have installed an Analog
Modem, this menu allows you to change the settings
of your wireless network.
ISP Dumb Mode: Some Internet Service
Providers might require this to be turned on.
It’s just a different mode of communication.
Galaxy 2 Network: Use this if you are connecting
multiple Galaxy II machines to this Galaxy 3.
Reconfigure Legacy Network: Is used to
examine the entire network of machines and
configure network machine node numbers.
Shows the status of each node on the net-
work. This step is required to be done from
the modem machine.
View Network Configuration: Shows the
last known status of all machines on the network.
Adjust Network Speed : Used to set the network
transmission speed. If Galaxy or Black Widow
machines are networked with Galaxy 3 machines,
the network speed must be set to 9600. If only
Galaxy 3 and Galaxy II machines are networked,
any speed can be used, but they all must be set to
the same speed.
Network Monitor: Displays all network data
sent by the machine in yellow and all network
data received in white.