manualshive.com logo in svg

AR SMOOTH FLITE 16 RRS, Руководство пользователя, Страница: 54 / 61

Поделиться
Скачать
AR SMOOTH FLITE 16 RRS Скачать руководство пользователя страница 54

 54

 

 

Smooth Flite Setup Hints

 

Elevons, Thrust Vectoring and Canards setup

 

One of the excellent features of Smooth Flite RRS is having unlimited Input to Output routing capabilities 
as well as sophisticated trimming capabilities. For the best Smooth Flite assisted outcome the following 
should be performed using Smooth Flite trim functions. 

 

In this Hint we will talk about how to setup Elevons, Thrust vectoring and Canards.  We will describe the 
exact setup used for our SU37 with Elevons, Thrust Vectoring, Dual Rudders and Canard.

 

We will use conventions of a brief Explanation and  

 

[The steps 



to get to the 



pages to achieve the outcome] 

 

Method.

 

On the TX, assign a single channel to elevator, a single channel to Rudder and dual channels to ailerons. 
The factory setup will automatically do this when you set the protocol to match your TX type. 

 

[Main Menu 

System 

Protocol type ]

 

 

Route the TX elevator channel to 2 Smooth Flite servo outputs. These will be eventually used for Canard 
control. 

 

[Main Menu 



I/O Routing]

 

 

Route the TX left aileron channel to 2 Smooth Flite servo outputs and the TX right aileron channel to 2 
servo outputs. These will be used of Elevon and thrust vectoring. 

 

[Main Menu 



I/O Routing]

 

 

Route the TX Rudder channel to 4 Smooth Flite servo outputs. These will be used for dual rudder and 
rudder thrust vectoring.

 

[Main Menu 



I/O Routing]

 

 

Run The Smooth Flite Gyro Wizard assign Smooth Flite assisted control to Rudder, ailerons and elevator. 

 

[Main Menu 



Smooth Flite 

 Wizard] 

 

Select Elevon mixing. Connect the elevon servos to outputs assigned to channels 19 and 20. Slowly move 
the aileron and elevator sticks being carful not to overdrive the servos. From the Smooth Flite, adjust the 
servo output Limit positions to the desired maximum movement positions.

 

 

[Main Menu 



Smooth Flite 

Advanced 

Tail Type 

Elevons].

 

From the Smooth Flite Elevon page, if necessary reverse the Elevator direction and adjust the amount of 
elevator  to aileron mix. 

 

Содержание SMOOTH FLITE 16 RRS






























































Отзывы:

Нет отзывов