AR SMOOTH FLITE 16 RRS, Руководство пользователя, Страница: 51 / 61

51
Smooth Flite Advanced Mixing Functions
Vectored Thrust Switching
Many modern Sports Jets and some Scale Jets come
with single and twin Vectored thrust. For the first time
Vectored Thrust pilot this can be a daunting experience
so we have provided a mechanism where Gyro assisted
vectored Thrust can be switched to ON/OFF remotely
from the transmitter. Up to 4 Servo outputs can be
switched to cover both twin engine and single engine
Vectored Thrust models.
TX Cont Ch is the transmitter control channel that trig-
gers the Vectored Thrust switching position. All 20 input channels are available (depending on the
number of transmitter channels available) to actuate the mix feature. A TX Control value of 0 (zero) turns
the mix feature off.
Vect 1,2,3,4 Out Are the (up to) 4 Smooth Flite Servo outputs that will be switched to the Vect 1,2,3,4
position.
Vect 1,2,3,4 Val Are the (up to) 4 Smooth Flite Servo outputs Offset positions that the Servos will move to
when Vectored Thrust is switched off.
Capture will capture and assign the current servo position for the (up to 4) Servo output channels.
Hint: To set up Vectored Thrust switching.
1) Assign the TX Control Channel from the transmitter.
2) Assign the Vect 1,2,3,4 Servo outputs. For a single engine use 1 and 2. For a twin engine you
would use all 4 servo outputs.
3) Release the transmitter stick so the thrust tubes are at the neutral position and then press the
“ CAPTURE ” button. This will capture and assign the current Servo Output position to the each
corresponding Vect 1,2,3,4, Value.
4) Test the function by switching the assigned transmitter switch. With the switch in one position all
Vectored Thrust tubes should move. Switching to the opposite position all vectored. Thrust tube
should move to the captured position.