AR SMOOTH FLITE 16 RRS Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 61

AR SMOOTH FLITE 16 RRS Скачать руководство пользователя страница 18

18

Graupner HOTT System.

Smooth Flite supports all receivers with HOTT protocol. HOTT receivers provide up to 16 channels (depending
and transmitter) into the Smooth Flite routed to any of the 16 servo output channels. Connect receivers to
Smooth Flite ports R1 and R2 to the SUMD port of the HOTT receiver. You will need to set the receiver to SUMD.

Please observe the correct polarity and pin placement when connecting the receivers.

For Telemetry connect

port TEL of the Smooth Flite to the telemetry port of either HOTT receiver.

Power Box Core

Smooth Flite supports SBUS capable Core receivers. Up to 16 channels are available (depending on transmitter)
into the Smooth Flite 16 routed to any of the 16 servo output channels. Connect receivers to Smooth Flite ports
R1 and R2 and to the SBUS port on the receiver.

Please observe the correct polarity and pin placement when

connecting the receivers.

Battery telemetry is supplied by the receivers.

Please observe the correct polarity and pin placement when connecting the receivers.

System Specific Receiver installation

«
...
16
17
18
19
20
...
»

Содержание SMOOTH FLITE 16 RRS






























































Отзывы:

Нет отзывов